Acura, Alfa Romeo, AH Sprite, Austin-Healey, BMW, Datsun, Nissan, Ferrari. Fiat, Ford, Honda, Isuzu, Jaguar, Lada, Lotus, Mazda, Mercedes, MGA, MGC, MG, Mitsubishi, Opel, Porsche, Saab, Saturn, Subaru, Sunbeam Alpine, Suzuki Swift, Toyota, Triumph, TR Spitfire, Volvo, VW

TOYOTA CELICA SOHC & DOHC

                                          TO ORDER OR FOR MORE INFO CALL (205) 823-7278 OR EMAIL gofast@paeco.com

Toyota Celica 18R, 20R, 22R, 24R

TOC-6000: This street grind is designed for torque and good acceleration. Best power range is 2600-6000 RPM, with a peak of 7000. It has a smooth fast idle and is not temperamental.  INTAKE: 25/61     EXHAUST: 65/21     DURATION: 266     LIFT: .400"

    Necessary mods: PAECO valve springs and retainers (an exhaust header, Primapower exhaust, racing ignition, aluminum flywheel, and Weber carb will all provide more power, but are optional).

TOC-6600: For slaloms and heavy street use, this cam produces very strong acceleration in the 3000-6600 RPM range. The peak of 7400 gives a nice boost in top speed also.  INTAKE: 34/66     EXHAUST: 70/30     DURATION: 280     LIFT: .492"

    Necessary mods: 10-11:1 compression, full PAECO valve train, racing ignition, exhaust header, Weber carb (a modified cylinder head, aluminum flywheel, and Primapower exhaust will provide more power, but are optional).

TOC-7500: This all-out racing cam delivers tremendous power in the 4500-7500 range, and will rev to 8000. It requires meticulous engine preparation, but is a race winner!  INTAKE: 38/70     EXHAUST: 74/34     DURATION: 288     LIFT: .537"

    Mandatory mods: 12-14:1 compression, full PAECO valve train, exhaust headers, racing ignition, fully modified cylinder head, increased carburetion, high ratio rear axle, aluminum flywheel.

PRICES FOR TOYOTA CELICA SOHC CAMS & VALVE TRAIN COMPONENTS

All cam grinds: $260 exchange ---- (add $160 if no exchange)                                                                          Rocker arms: $39.00 each

Inner valve springs: $4.00 each     Outer valve springs: $8.00 each    Aluminum retainers: $8.00 each     Titanium retainers: $25.00 each

 

Toyota Celica DOHC (3-SGE & 5-SGE)

TOCD-6500: These cams are for hot street use, and will provide strong acceleration. The best power range is 3000-6500, and they will rev to 7500 in a well prepared engine.  INTAKE: 28/62     EXHAUST: 68/22     DURATION: 270     LIFT: .403"

    Necessary mods: PAECO inner & outer springs & aluminum retainers. A 1.0 to 1.5:1 boost in compression will give even more power but is not mandatory.

TOCD-7200: These cams are for very hot street and strip use. The best power range is 3500-7200 and it will rev to over 8000.                                INTAKE: 30/70     EXHAUST: 70/30     DURATION: 280     LIFT: .427"

    Necessary mods: PAECO inner & outer springs, titanium retainers, 11:1 compression and a modified cylinder head. An aluminum flywheel will add even more acceleration and a Kevlar clutch is recommended for reliability.

TOCD-8000: These are all-out racing cams with tremendous power in the 4500-8000 RPM range. They will rev to 9000 in a well-prepared engine.  INTAKE: 34/78     EXHAUST: 78/34     DURATION: 302     LIFT: .452"

    Necessary mods: PAECO inner & outer springs, titanium retainers, 13-14:1 compression, fully modified cylinder head, chrome-moly or titanium con rods, aluminum flywheel, Kevlar clutch.

PRICES FOR TOYOTA CELICA DOHC CAMS & VALVE TRAIN COMPONENTS:

All cam grinds: $210 per cam, exchange ----- (add $180/cam if no exchange)    SPECIFY MECHANICAL OR HYDRAULIC LIFTERS

Inner valve springs: $4.00 ea    Outer valve springs: $8.00 ea     Aluminum retainers: $12.00 ea     Titanium retainers: $25.00 ea

Valve adjusting shims: $14.00 each (Any thickness)    NOTE: For mechanical lifters, shims will be necessary to set the valve lash. You must install your cams first to determine the thickness of the shims that you will need, then call us. We can furnish shims in any desired thickness.

 

WE CAN ALSO FURNISH CAMS FOR ALL OF THE OLDER TOYOTAS

CAMS