Acura, Alfa Romeo, AH Sprite, Austin-Healey, BMW, Datsun, Nissan, Ferrari. Fiat, Ford, Honda, Isuzu, Jaguar, Lada, Lotus, Mazda, Mercedes, MGA, MGC, MG, Mitsubishi, Opel, Porsche, Saab, Saturn, Subaru, Sunbeam Alpine, Suzuki Swift, Toyota, Triumph, TR Spitfire, Volvo, VW

                               CRANKSHAFTS                               

1. BILLET CRANKS

2. PAECOLLOY CRANKS

3. CRANKSHAFT MACHINE WORK

                                                    1. BILLET CRANKS

        Billet cranks are machined from a solid bar of E4340AQ alloy steel and are unsurpassed for strength and rigidity. They have standard size radiused journals, are balanced, and can be furnished in non-standard strokes if desired. We have patterns for the more common makes of engines but if we do not have one for your engine, you will have to send an old crankshaft to us to use as a pattern. Delivery time is approx 3-months, and no, that can't be speeded up. Prices are as follows:

4-cylinder $3,500 XXXXXXXXXXXXX Special stroke $150 per journal
6-Cylinder $4,200 XXXXXXXXXXXXX Knife-edged $200 plus $50/counterweight
8-Cylinder $4,800 XXXXXXXXXXXXX Extra bolt holes or dowels $100 per hole
12-Cylinder $5,400 XXXXXXXXXXXXX    

                                        2. PAECOLLOY CRANKS

    If the billet cranks are outside the budget, then you may want to go with a PAECOLLOY crank. These are stock crankshafts, usually the one that you send to us, that are built back up to standard size with a hard nickel-chrome alloy. The result is a crank with very hard journals that can withstand the rigors of a high compression, high revving engine. If you have been using an undersized crank, building it back up to standard will add quite a bit to the strength of the crankshaft, in addition to the hard journal surface. The following prices are for performing this treatment on your crankshaft. We do have a limited stock of cores if you need one: The cranks are balanced and glasspeened before shipping.

4-Cylinder Paecolloy $590 XXXXXXXXXXXXXX 4-cyl Paecolloy & stroked $1,599
6-Cylinder Paecolloy $790 XXXXXXXXXXXXXX 6-cyl Paecolloy & stroked $1,999
8-Cylinder Paecolloy $990 XXXXXXXXXXXXXX 8-cyl Paecolloy & stroked $2,399
12-Cylinder Paecolloy $1,290 XXXXXXXXXXXXXX 12-cyl Paecolloy & stroked $2,999

                                          3. CRANKSHAFT MACHINE WORK

Crank journals turned $40 per journal XXXXXXXXXXXXXX 4-cyl cranks balanced $75
Crank glasspeened $40 XXXXXXXXXXXXXX 6-cyl cranks balanced $125
Cranks knife-edged $200 + $50 per counterweight XXXXXXXXXXXXXX V-8 cranks balanced $200
    XXXXXXXXXXXXXX V-12 cranks balanced $200

Stroker Kits        Machine Work