Acura, Alfa Romeo, AH Sprite, Austin-Healey, BMW, Datsun, Nissan, Ferrari. Fiat, Ford, Honda, Isuzu, Jaguar, Lada, Lotus, Mazda, Mercedes, MGA, MGC, MG, Mitsubishi, Opel, Porsche, Saab, Saturn, Subaru, Sunbeam Alpine, Suzuki Swift, Toyota, Triumph, TR Spitfire, Volvo, VW

***** Copper Head Gaskets *****

                    TO ORDER OR FOR MORE INFO CALL (205) 823-7278 OR EMAIL gofast@paeco.com  

The head gaskets that come in most gasket sets are what is known as a "composition" or "sandwich" type of gasket that uses a small amount of steel or copper and a lot of asbestos fiber in the middle. The result is a gasket that will seal O.K. for normal usage, but is inadequate for high compression or turbocharged engines.

    Our solid copper head gaskets have no asbestos in them. They are cut from sheets of solid copper stock and unless they are mutilated, will last for the life of the engine. They can be re-used over and over, which is important for racing engines that are being torn down often.

COPPER HEAD GASKETS NEVER BLOW OUT ---

    In fact, they are virtually blow-out proof. If the block and head mating surfaces are milled true before installation, these gaskets will never blow, regardless of what compression ratio or turbo boost you are using.

SPECIAL APPLICATIONS ---

    If you are using oversize pistons in your engine, we can furnish a head gasket with larger cylinder holes to accommodate the larger pistons at no extra charge. We strongly recommend these solid copper gaskets for oversize pistons, high compression engines, turbo-charged engines, and nitrous oxide applications.

    We have the patterns for most of the more common makes of engines in stock. If we don't have a pattern for your engine, then you will need to furnish us with a stock new or used gasket to go by. The price will remain the same as for our standard gaskets, but we will keep the gasket that you furnish us to add to our pattern stock.

    Gaskets are available in  .060" thickness only. No other thickness is available, however, you can stack two or more gaskets together if you need to a thicker one. For additional information or to order gaskets, contact PAECO at:Ph: (205) 823-7278 ----- Fax: (205) 823-5045 ----- E-Mail: paeco@hiwaay.net

                                                           PRICES OF COPPER HEAD GASKETS ---

4-cylinder in-line gaskets  $220 each
6-cylinder in-line gaskets  $280 each
V-6 gaskets (Both gaskets)  $360 per pair
V-8 gaskets (Both gaskets)  $390 per pair
V-12 gaskets (Both gaskets)  $490 per pair

SHIPPING & HANDLING: ADD $18.OO FOR GROUND OR $38.00 FOR 2-DAY AIR OR $58.00 FOR NEXT DAY AIR.